Halloween: Crackled and Jeweled Floral Sugar Skull Wall Art

 

I FINALLY got back to my craft room to make something last week! After the Summer from H*LL, the near septic abscess that tried to kill me followed by weeks of recovery, a move, and then surgery to remove the abscess host ovary and more weeks of recovery, it hasn't exactly been a productive Summer. But doctors know things and it was almost like clockwork when my energy level finally started coming back around week 5 post-op. 

Supplies: 

• Wood Art Board (Target Clearance but available at Art Supply Stores)
• Acrylic Paints (Folk Art and Craftsmart)
• White School Glue (Elmers but store brand will work too) 
• White Vinyl, Transfer Tape (Cricut)
• Jewels (Art Minds, Michaels)
• Dimensional Glue ( Glossy Accents, Ranger)

Before all of this started, I'd stumbled on these fabulous Art Boards at Target which screamed "buy me" especially since they were on clearance for something like $3 so of course I bought all the ones they had! Seven of them for what two cost at regular price. 

I had this mega pack of purple jewels from a previous project so it became the inspiration for my color choice of Purple, Black and White which will fit right into my primarily Black and White Halloween decor.

 

I painted the board with a coat of Folk Art Violet Pansy. I didn't care about a perfect finish because that's not my thing and besides, I knew I was going to add black with the purple showing through the crackle. 

My go to process for achieving a crackle finish is good old white school glue. I stock up on it during school supply season! Apply it straight from the bottle and then spread it trying to use complete strokes in one direction. 

You want a medium coverage of the glue. Too thin and it won't crackle. Too thick and you won't have a smooth surface. Let this coat dry to tacky. I use my handy craft tool...an old blow dryer set on cool, to speed up the process. You don't want the glue completely dry. Go over the glue layer with the black paint, using the same one direction brush strokes as the glue layer. If you're patient, you can let this air dry. If you're me, grab the blow dryer again, this time set on warm to help the crackling process. 

Q: "Can I use my heat gun?"

A: NO! It's too hot and everything will bubble and peel which might give you a cool effect but it won't be THIS effect. 

Don't worry if the glue shows through. Once dry, it dries clear. Even though I help the drying process with the blow dryer, set it aside to dry completely which gives you time to work on the vinyl piece. I found this image on Creative Fabrica ( Disclosure: I am an Affiliate so if you use this link to purchse, I do receive credit to their store).

Download your image  then bring it into the Cricut Design Space Software ( these files work with all of the different cutting machines but I used my Cricut) and size accordingly. I cut this from white Cricut Vinyl, using my Explore Air 2. 

Weed your vinyl (if you're new to vinyl, weeding is the process of removing the vinyl from the negtive spaces to reveal your image) and then apply the Transfer Tape (this is clear tape, I used the Cricut brand, that allows you to position and apply the vinyl to your surface). 

Position your transfer tape lightly on your surface until satisfied then use a scraping tool ( I use the one that came w/ my first ever Cricut or they sell them at craft stores and you can also use an old credit card etc. ) to apply your vinyl to your surface. Peel off the transfer tape.  I do this slowly vs ripping off like a bandaid in case there are spots the vinyl isn't sticking. It allows you to maintain the positioning and fix any issues. 

Then it was time for the jewels! I used a strong glue (Glossy Accents by Ranger) to adhere these and just randomly placed using the different sizes and shades. 

Et, voila! 

I haven't hung it up yet because I haven't started my Halloween decorating yet but I absolutely LOVE how it turned out and I have some other projects planned using this color scheme! Happy Haunting Season! 

Sharing At: 

Halloween : Witch Switch Girlfriend Gifts and Haunting My House

 

Pre-pandemic when I would get together with girlfriends, I always liked to bring a little seasonal something. Makers love making things right?! So will we let a pandemic stop us from showing our friends that we love (and miss) them? No, we will NOT! That's what mail is for and I get to help out the USPS. 

In this project, I'll show you how to make your own crackled surfaces without needing a specific crackle medium. 

Supplies: 

• Wood Plaques ( Dollar Tree)
• Acrylic Paints
• White Glue
• Vinyl ( I used Cricut's Glossy Black)
• Cut File (I got this fun file from designbundles.net )
• Wire
• Ribbon

I found this pack of 6 wood plaques at Dollar Tree ( 4.25 x 4.25 ) and of course I now wish I'd bought several packages. 

Since we're crackling these, you want to start with the color you want to peek through the crackles. For all of these, that was black. 

I painted both sides and the edges so I'd have a finished look when done. 

For the crackle, all you need is some white school glue. I stock up on this during back to school when they're like $.50 a bottle. After your base coat is dry, cover with a medium layer of glue. Too thin, and it will dry too quickly. Too heavy and it takes longer. So in the middle!

Wait a a few minutes (or you can speed things up with a blow dryer on cool but you don't want to dry it completely) and then go over with your accent color. The important thing here is to only paint in one direction, don't go back and forth with the second color of paint. 

You can let the top coat air dry or you can be impatient like me and use a blow dryer. Now it's OK to use a warm setting which will help the crackling. Do NOT use a heat gun which will bubble your paint. 

I kept two of the signs black and white to match my friends style; others, I used different colors to match their styles but did another layer of glue and white paint. 

While your plaques are getting good and dry, you can cut your vinyl. I re-sized the file in Cricut Design Space and then cut using glossy black vinyl.

Take a Valium and weed your vinyl. Just kidding. I hate weeding like Indiana Jones hate snakes. Do some deep meditative breathing and keep telling yourself "My friends are worth it. My friends are worth it".  Then use transfer tape to apply your vinyl to your sign. 

To finish, I cut pieces of medium gauge wire and wrapped around a paint brush handle to curl. Glue to each end with hot glue. Make bows from black ribbon and glue atop where you glued the wire ends as shown. 

I was really happy to hear from the recipients that they liked them. For a couple this is their only Halloween decor this year because have you met 2020? 

I did decorate because no matter what, I like being surrounded by seasonal decor . It's kinda what we do right? So here is a glimpse at my "Haunted House". 

Entryway table with my Witch Hat Wreath, Upcycled Goodwill Candle Holders, Mackenzie Childs Pumpkins and Glam Skulls from this year's projects. 

I also did my coffee table:

And a Poe vignette in the fireplace we don't use! I made Mr. Skully's Hat years ago and it's held up. 

Even the light fixtures aren't safe. Gold and black tulle, Dollar Tree glitter skulls and skeletons. 

And while most of my Halloween decor is black, metallics, and neutrals, I did add some color with a Dia De Los Muertos corner: 

Michaels had this pretty striped ribbon on sale which I used as the inspiration for the banner and pinwheels. I cut the images (Silhouette Design Store) from metallic vinyl. The banner itself I cut using black and orange cardstock and then added a "papel picado" (pierce paper) feel using different punches. The pinwheels are Astrobrights paper and the black pom poms are Dollar Tree. 

Happy Haunting!