Sunday, November 23, 2014

Metal Embossing: Fired Copper Plaque

Embossed Metal Plaque

Sharing a a gift / décor idea using one of my favorite techniques that looks a lot harder than it is:heat fired  embossed copper.

For this project you will need:
  • Embossable copper (you can find at art supply stores, Michaels, JoAnn etc.)
  • Die or image to trace
  • Heat source ( pencil torch, micro torch, something w/ a flame)
  • Wood plaques
  • Paper scraps
  • Mod Podge
  • Washi Tape
  • Stamps, colored pencils, ink
  • Embellishments
Painters Masking Paper

First step is to prepare the plaques. I have a roll of this masking paper in my stash that I use in a number of projects. It’s thin, accepts Mod Podge and/or paints easily and most of all is cheap. Look for it in the paint aisle of your HW store. Measure to fit your plaque, cut to size and then crinkle to give it texture before applying.

Paper Covered Plaque

You now have a canvas you can play with. I used some paper scraps, inks and washi tape to make my background.

Diecut Copper Sheets

I used a Memory Box die to cut the oak leaves. Run through a die cutter ( I used a Cuttlebug). TIP: If you don’t have a die cutter, print out an image that you want, lay it on top of the metal sheet ( put a magazine or rubber mat under the metal) trace on top of the image with a stylus and then cut with scissors.

Embossed Copper

Once you have your shape you can use a stylus to draw lines, details etc into it. I just did this freehand.

Heated Copper Leaves

Using your pencil torch ( you can find these at the hardware store) apply flame to your copper pieces. USE LONG TWEEZERS NOT YOUR FINGERS TO HOLD METAL! Here’s a video that shows the basic process.

If you have a gas stove you can also hold the metal over a lit burner.  The thinner the sheets, the faster the process so watch closely until you get the effect you want. If you don't want to play with fire, you can skip this part and/or use a different metal.

Since I like to age things, I dry brushed my finished metal pieces with black craft paint and then wiped off just to dull them a little. Once done, glue to your prepared plaque with a strong adhesive ( I used Liquid Fusion) and embellish.  I used scrap velvet ribbon tied in a simple bow and some pinecones I found on a walk.

Oak Leaf Acorn Plaque and Tag

Now that you’ve made a lovely gift, the presentation should match don’t you think? I used a stamp with acorns and oak leaves on the envelope for the card and the gift tag and stippled inks on the envelope.  I also used some of the masking paper and scap paper from the plaque for the tag.

Here are some other metal embossing projects you might like:

Embossed Metal Snowflake Tile

Embossed Metal Christmas Ornaments

Sharing At: 



Thursday, November 20, 2014

BFF Open House Link Party #185: Thanksgiving Crunch Time!

The Answer Is Chocolate

ONE week! This time next week, most of  the US will be taking a collective tryptophan induced nap so party hearty this week while you're still awake.  Hard to believe that Thanksgiving is just one week away. Here are some great ideas you still have time to incorporate into your holiday planning. 


Whether you set a formal table or go more casual, The Pin Junkie has some great ideas for place cards that add that extra touch. 


Everyone has their favorite Thanksgiving side dish but if you're looking for some new veggie options, check out Upstate Ramblings for some great options. 


Whether you think of them as such or not, you probably have some Thanksgiving Family Traditions. If you're looking for some additional ideas, Lou Lou Girls has you covered. Some really lovely ones! 


OK. If I have one gripe about Thanksgiving ( I know...not really the time to have any gripes) it's the lack of chocolate! So I'm always on the lookout for something I can add to the dessert options like these Chocolate Wacky Cupcakes With Vanilla Buttercream Frosting yes please and thank you from SimpleReipesClub

Now onto this week's party!

   
   




Cornhusk Altered Candles


Sharing the details of the guest post I did for Mod Podge Rocks earlier this week. As you can see from a few projects, I'm a little obsessed with cornhusks this year! 

For this project you will need: 
  • Plain glass prayer candles ( I got mine at Dollar Tree)
  • Cornhusks ( wherever Mexican food ingredients are sold these are used for tamales) 
  • Mod Podge ( my go to is the Matte formula)
  • Dimensional Mod Podge ( I used gold) 
  • Craft Paint
  • Your choice of paper(s)
  • Ribbon
  • Coordinating paper scraps
  • Glue gun and glue sticks

Apply your choice of paper to your candle with what else? Mod Podge. I used paper from a roll I found in the paint section at the hardware store. I think it's normally used to cover glass when painting things but I love it because it's thin, absorbs the Mod Podge beautifully and is a neutral color you can paint or stamp or leave as is. Measure enough to fit around your candle. I tore the top and bottom edges of the paper because I like torn paper. I also scrunched the paper up to give it a more rustic feel. 



Apply enough Mod Podge to cover one side of the paper ( you can see the torn edges and "scrunching" ) and then attach the paper to your candle. I find it's easiest to leave the paper where it is, lay the candle on its side and then roll until it's covered. Once secure, apply another coat of Mod Podge to seal. 


While this is drying, you can make your cornhusk leaves. You may have seen that Mod Podge can be used to preserve Fall leaves. I figured it might work on cornhusks too! Cut leaf shapes ( I just did this freehand) from  your cornhusks. If they are really really stiff you can mist with water to make them more pliable. Apply Mod Podge to both sides and once dry, you can use as is or as I did which was to paint the tips with some glitter craft paint.  If they curl a bit wait until fully dry and you can flatten them out by bending them in the opposite direction.


Once the paper was dry on the candle I went around it with a piece of washi tape paper but you can also use a coordinating piece of scrapbook paper, book page etc.  Hot glue the leaves together as shown then glue to your candle. I added some scrap velvet ribbon at the top of the leaves. 


To finish, I grabbed some paper scraps from my stash and made rolled paper roses.  Waste not want not. I had some scrap cornhusk pieces so I painted those silver and glued the rose on top of them as shown. I edged the top of the candles with the ends left over from the washi paper.  Finally, I filled in the center with gold dimensional Mod Podge. 




Sharing At: 


Tuesday, November 18, 2014

Fairytales Do Come True...Guest Posting at Mod Podge Rocks


My dear readers, if you're a reader of my blog you know that next to chocolate the thing I love most is Mod Podge. Suffice it to say I am over the moon to be guest posting at the epicenter of all things Mod Podge: Mod Podge Rocks!! Sharing these altered candles featuring my Fall obsession, cornhusks. 

Thank you Amy for having me! 

Saturday, November 15, 2014

Thanksgiving 2014 Banner: Cornhusks are Back!


This week's link party is still going strong here so please link up! 

Sharing my Thanksgiving mantel for this year. You might recall my Cornhusk Wreath shared here.  I had some cornhusks left over and couldn't wait to play with them some more. 

Life is always challenging. This year has been no exception. Yet despite challenges, we have much to be thankful for. So it seemed an obvious choice for a banner.  The banner was pretty simple. I cut the letters THANKFUL from metallic brown paper using my Cricut ( Expression...not Explore...trying to win one of those or if anyone wants to hook me up with the Cricut people!) and matted as shown on cream and gold card stock . 



I have a container full of punches I haven't used in a while and found this one that looks like acorns so punched the bottom corners of the cream cardstock. Used gold glitter washi tape to edge the top of each panel. 


I decided to make some cornhusk leaves and  feathers. Feathers are really popular right now and they fit right in with my idea.  


I cut leaf / feather shapes from cornhusks, coated them with Mod Podge to make them less brittle and edged the tips with gold glitter paint. I used Martha Stewart gold. 


I attached my leaves / feathers to the bottom of each letter using my glue gun and added a punched maple leaf to a couple of the  letters 


For some of the letters I did leaves. For others I did feathers. Same shape as the leaves but I notched the edges and cut some additional feathers from kraft cardstock. 


I'm happy with the mix of rustic and glitz. I also had fun re-mixing pieces from prior years.  Some of my favorite pieces from my mantel this year: 


Script Tissue Paper Pumpkin from 2012 and turkeys I found at JoAnn's for 75% off a few years ago and painted. 


Dollar Tree glass candles ( wrapped in Dollar Tree tissue paper) that I did for New Year's 2014 and ended up keeping out all year. More JoAnn's turkeys. My white pumpkins from Halloween are still holding on. Just a little longer little guys. 



And this year's Cornhusk Wreath

Less than two weeks to T-Day! 

Sharing At: 













Thursday, November 13, 2014

BFF Open House Link Party #184

The Answer Is Chocolate

T-Day minus exactly two weeks people! TWO WEEKS. And then you know what happens right? Full speed til Hanukkah and Christmas. And not judging anyone because I'm pinning tons of Christmas ideas but I am a stickler about no Christmas decorations until after Thanksgiving.

Lots of great ideas at last week's party. Here are just a few!


Heather from Woods of Bell Trees some great ideas on transitional decorating perfect for this time of year between holidays. Love the pumpkins and pinecones that work thru Thanksgiving and then the other pieces that go into Christmas. 


The Gracious Wife has a lovely roundup of Thanksgiving table decor and centerpieces. 


I am in serious love with these pinecone cookies from Ooh La Lovely

Make a platter of  pinecone cookies and these adorable acorn cookies from momdotcom using mini Nutter Butters and Hersheys kisses. Perfect for your Thanksgiving dessert table. 


Now onto this week's party!

   
   





Sunday, November 9, 2014

Dollar Tree Altered Pumpkin Candleholders

Dollar Tree Thanksgiving Candle Holders

I picked up a couple of extra foam pumpkins at the Dollar Tree during Halloween shopping. Like most projects I do, I knew I’d do something with them but not exactly what. Since the tag said they were carvable, I thought maybe I could use them as the base to hold glass candleholders , also from Dollar Tree. No clue why this thought came to me...just did.

For this project you will need:
  • Dollar Tree ( or other carvable foam pumpkins)
  • Glass candleholders (Dollar Tree)
  • Craft paint
  • XActo knife
  • Twine
  • Charms
  • Hot glue gun
  • Paper Roses
Dollar Tree Pumpkin

Using the bottom of the glass candleholder as a guide, I traced a circle around the top of the pumpkin and cut out the top with an Xacto knife:

Carved Dollar Tree Pumpkin

Yay…no pumpkin guts to deal with. Inside the rim looked a little rough so I covered it with some Mod Podge and tissue paper. It doesn’t really show in the finished project but I wanted to be safe  just in case.

Painted Dollar Tree Pumpkins

Paint pumpkins with a couple coats of craft paint (I used taupe).

Tip:  use push pins to make it easy to pick them up and hold while painting.

When the base color is dry, dry brush with white. The bumpy texture of the pumpkin really shows through with the dry brushing.

Dollar Tree Pumpkin Makeover

Glue paper roses around the top of the pumpkin (you can see the tissue paper I used to rim the inside of the pumpkin) .

Dollar Tree Makeover 1

Now on to the candleholders.

Dollar Tree Vase Makeover

Wrap the twine around the top of the candleholder and tack in place using hot glue.
Twine Wrapped Vase

Hot glue charms to center:

Oak Leaf Charm Vase

Place candleholders inside pumpkin base.

Dollar Tree Thanksgiving Candle Holders

Sharing At:
The Girl Creative