Mega Paint Pour 30 x 40 Canvas

Happy April everyone. If you love April Fool's Day good on you. Me, not so much! 

Sharing my biggest Acrylic Paint Pouring project today. I shall call her "Canvasouras".  I had so much fun with this one and have to say, it is my favorite one yet. 

Supplies: 

• 30 x 40 canvas (Michaels had these 70% off so this one was $34 less 70% final cost $10.20 and of course I bought 2  and any video of me getting these out of the store while pushing a cart is for sure hilarious)
• Artist Loft Acrylic Paints in White, Raw Umber, Black, Gold, Light Turquoise ( picked up a couple of large bottles that were 40% off at Michaels). The big bottles are $9.99 full price and the smaller 4 oz tubes are $3.99 full price. 
• Zinsser Flow Control paint medium
• Water
• Hand Sanitizer (secret ingredient!)

My first challenge was figuring out how I was going to stabilize my canvas and keep it off the floor. Enter giant Target plastic storage bin, the kind that will hold wrapping paper etc. Inexpensive , had on hand, flipped it upside down and worked great!

Next came mixing the paints. For this, I used bigger cups ( 12-16 oz red Solo drink cups for the white, black, gold and brown) than I've been using and one thing I've learned along my paint pouring learning journey is to get the paints thin enough w/out making them too runny. This is trial and error but I did about 1/2 paint and 1/4 ea paint medium and water. Stir slowly until really well blended. The secret ingredient? Hand Sanitizer! I saw this in a video and wanted to try it. The ingredients really aid in the creation of cells which is something I've been struggling with. More on this below. 

For this one, I did what's called a "puddle pour" which, as the name suggests, you pour your paints to make a puddle on the canvas, layering them as you go. 

I made puddles at each end of the canvas. One was white dominant and the other was brown dominant and I layered the colors randomly, and then took the rest of the the white and black and poured around each puddle on the corresponding side. 

The consistency was PERFECT this time because as you tilt the canvas, the paints flowed and were able to cover the entire canvas and run down the sides. Now for the "secret ingredient" the hand sanitizer. 

People use different mediums to create cells. Everything from WD40 to treadmill lubricant to hair serum etc. I picked up some hand sanitizer for $1.79 at the grocery store. The alcohol content plus the viscosity interacts with the paint to give you the right effect. Since I wasn't sure, I didn't add it to every color and will next time. I also discovered that if you don't securely have the cap on your paint tube, shake it so you can squeeze out the remaining paint, get it on your wall because oops....hand sanitizer gets it right off! Who knew? 

These are the "cells" I'm talking about. It's just chemistry magic. Don't ask me to explain it! I just love looking at them, mesmerized, as they emerge. 

This piece was going in our living room and while I'm known for neutrals, I wanted to pick up the aqua from the globe and tie in the brown from the clock , the chair etc. 

I'm SUPER happy with the results. What do you think? 

Sharing At: 

Paint Pouring: Coordinated Panel Collection

I'm still practicing my paint pouring skills and wanted to do a kind of gallery wall with 12x12 panels in our bedroom. I am so happy with how these turned out!! 

If you're not familiar with paint pouring there is lots of help available on Pinterest and You Tube. I have a paint pouring board on Pinterest here. 

The reason I love it is there's no ( at least not to me) right or wrong once you follow the basics. It's all about what you like and experimenting with the mix of the pouring medium and colors you choose. The best way I've found to figure things out is to just play with it and do it. I will say that if you're going for a coordinated look like what I did with this project, it's probably better to do all of your pouring on the same day so you can be consistent in your formulas. Weather can also be a factor so doing them on the same day ensures drying time etc. is also consistent. 

There are also kits and paints designed specifically for paint pouring. I've just been winging it with a mixture of different acrylic paints and mediums. Here's what I used for this project: 

Supplies: 

• Paint Booster Paint Additive ( I got mine at Lowes)
• Artist Loft Acrylic Paints (Michaels)
• 12x12 Wood Panels ( Blick Art Materials)
• 12x12 Canvas (Michaels)
• Alcohol ( 91% or more is best)
• Water 

You'll also need: 

• Something to cover work area
• Mixing Cups
• Gloves ( eg vinyl or latex because your hands will get messy)
• Push Pins (push these into at least 4 corners of the back of your surface to make a little stand so the panel isn't touching your work surface)

There are different techniques to paint pouring. You can pour your paints directly onto the surface individually or you can layer in a cup which you'll then flip onto your surface. I used the former for the white panels and the latter for the black panels. I also thought I was going to just do four but decided six panels worked better for the space. I only had 4 of the wood panels so I did the other two on canvas since that's what I had on hand. 

I didn't prep the wood surface but I did cover the canvases with a couple layers of Mod Podge as a sealer. 

Layered Flip Cup Method

This is the method I used on the black panels. Once you mix each color separately with the mediums ( I used a couple capfuls of the paint booster, one capful of alcohol and a little water to get a pourable consistency...one that drizzles steadily from a stir stick) you can then layer each paint color in a separate cup. I just alternated colors. 

Someday I'll do videos but not yet :) 

Once you have enough paint ( I just used plastic drink cups and for a 12x12 panel filling to the top was enough) you put your surface on top of the cup and then flip it over. 

Some will seep out so be prepared! You can slide your cup around your surface or just lift the cup off where it is. 

Oooooo magic! This is my flipped puddle and you just start tilting your panel slowly to spread the paint. You want to make sure you cover the entire surface and then as the paint drips down the sides you can take a gloved finger and kind of finger paint the edges. 

I love that no two are alike and each piece you make has its own personality. They're soothing for me to look at ad just discover new patterns each time I do. So much fun! 

Adventures In Paint Pouring, A Beginner's Journey: Dirty Pouring

My fascination ( obsession? ) with paint pouring continues. I am hooked on this! No two pieces are alike and watching the paints as they interact is hypnotizing and meditative. Seriously, I had a really bad day last week and doing some paint pouring completely changed my mood. 

What's that picture at the top? It's actually the inside of the cup I used for this technique called a "dirty pour". 

My simplified explanation of the dirty pour is you layer your paints in the cup vs a clean pour where you pour each color individually. In either process you need to mix each  paint color in its own cup. 

Supplies: 

• Surface to paint. I used an Artist Panel ( aka a piece of wood they get to charge more for) 
• Paints and flow additive
• Cups 
• Stir sticks
• Paper towels or rags
• Lots of stuff to cover your work surface

I got out some paint colors to play with. I had someone in mind for this if it turned out OK and I didn't have to smash it with a hammer, so I went with her colors. 

For my first couple of pours, I used Liquitex Pouring Medium, but at $16.99 a bottle ( before 50% off with an additional 20% off total purchase coupon from Michaels) that's going to get a little pricey while I learn how to paint pour. I'd seen something called "Floetrol" mentioned as a good alternative. This is available at the HW store. I went looking for it but they only had a bigger size than I wanted to get (because what am I going to do with it if this piece turns out hideously ugly and the aforementioned hammer smashing was needed?) BUT they did have this Zinsser Paint Booster stuff shown above that I bought for $7.85 at Lowes. 

Looked like the same contents as the Floetrol to me and MUCH bigger than Liquitex for half the price. SOLD! 

I had a few of these "Artist Panels" in my stash from when Aaron Brothers Art and Frame was going out of business ( RIP AB! I know you're inside Michaels now kinda but I really liked your stores. Sniff) but basically, it's a piece of wood. 

I decided to play with this vs a canvas this time. 

Prepare your paints! So one thing you want to do is make sure you have all your mixing etc. done before you pour because well, you'd have nothing to pour? I've been playing with a ratio of 2:1 paints to additive. The Paint Booster stuff is thin so I think I may up this to 3:1 for the next one. 

Mix each color in its own cup. I have found I like the wide craft sticks the best for mixing. Personal preference. No rules! 

These are the colors I ended up going with. You can see for this 8x10 surface, I didn't need to fill each cup. Now it's time to prepare your pour. Take a clean cup and pour in your first color. Add pours of your other colors, color by color. Again: no rules!! Some people do it making concentric circles ( pour each color dead center of the last). Other people drizzle and drop their color layers. I did everything. Pour. Circle. Circle. Drizzle.Drop. Drop.  Repeat until you have enough paint that it looks like you'll probably cover your surface. For this size piece I filled my pour cup a little more than half full. 

 I actually started with black then blue then green then white ( and just realize this looks like sour cream over guacamole or am I just hungry) and somewhere in there are purples and lavender. Once you're happy with your pour cup, place your surface on top of the cup and flip so the cup is now on top. This is understandably called "the flip" ( oooooooh aaaaaaaaahhhh).

 You can see the paints start to work together as they run down the insides of the cup. Isn't it pretty?!

The next step is , and this is the part where if you didn't protect your work surface then you still have time ...."paint pourer lift that cup". Your paints will take off and go making their way across the surface. You can help this along by tilting your panel in whichever direction is needed for the paint to spread. This is where you want to have gloves on if you haven't up to this point.

This is the wet paint after I tilted and turned to cover the entire surface and the sides. I love sitting there watching the paint continue to interact and form new patterns and colors. I could sit for hours.

Since this isn't an exact science with precise measurements I had leftover paint. So I thought I'd use the same colors to do a clean pour. I didn't take pictures but this was done by just drizzling the remaining paints since I didn't have enough to do layered puddles.  The flow additive really made a difference and the paints flowed much more freely than with the Liquitex (which could have been more to do with me not using enough additive).  Blah blah blah...I love the result!

I'm loving this journey because I don't think there's a final destination! Now what can I do with that pretty pour cup ??

My First Paint Pour: Paper Towel Swipe Method

So while I was without a craft room, I became obsessed with paint pouring. I may be very late to the party but I'm here now and I'm so hooked! If you haven't played with this let me warn you, it's so much fun and addictive from the first project and expect to see more projects!

What is paint pouring? In my own words, it's basically thinning acrylic paint with a medium that increases it's fluidity and flow, to create cells that dry into different patterns.  I'm sure there is a more official description but that's what it boils down to for me.  I just decided to experiment based on the concepts I'd seen on Pinterest and You Tube. 

Supplies: 

• Canvas or other surface. I used a 12x12 canvas from Michaels
• Acrylic Paints. I used 2oz bottles from my craft stash, nothing fancy ( in other words, not from the fine art section)
• Flow medium. I decided to go with an official medium and used Liquitex Pouring Medium ( Michaels ) but have seen references to everything from just water, silicone, other brand name pouring mediums, even hair care products.  Since this was my first time I decided to be "official"  and use something designed for this.
• Containers and utensils to mix paint and medium 
• Paper towel

I added enough pouring medium to make my paints pourable. I craft like I cook...by instinct so it was about 2/3 paint 1/3 medium and as you can see, for this size canvas you don't need a lot. 

You will want to make sure you have your work surface covered because it will drip down the sides. I just poured a couple of colors in random patterns as shown and kept adding paint until I felt like I was ready to do the swipe. 

I started with black and silver, and then added gold and white, and just kept pouring and swirling. 

When you're done adding your paint, you'll need a wet paper towel for what is called the "swipe". I went for wet but not sopping and just kept it at the ready in its own cup. This is something you'll want to watch a video to see the technique because I couldn't do it and take pictures at the same time but basically you straighten out your wet paper towel and then line the bottom of it up with the top of your canvas and swipe ( to me it's really more of a drag) your wet paper towel down to the bottom of your canvas. 

You'll pick up paint on your paper towel which you can offload on an extra piece of paper. I actually saved my paper towel once it dried. It looks like a piece of handmade paper which I guess it is! Repeat on the remaining un-swiped area of your canvas. 

Now don't do what I did! I prefer to think of creative mistakes as "happy accidents". I am impatient and I wasn't sure if I'd totally mucked up my project ( I hadn't) because I wasn't seeing the cells develop immediately.  This is the part where you don't want to repeat my mistake ( unless you decide you do!). 

I dragged my paper towel sideways instead of just leaving it alone because I thought maybe I hadn't covered my canvas well enough. I ended up making these kind of wave patterns which in the end turned out fine since there really is no right or wrong here but that's not what you're supposed to do. I also wasn't seeing as much gold as a result because I'd dragged too much black paint over it so I just randomly dropped some from the cup with the gold in it.  

Had I been more patient, I would have realized that the interaction of the water from the paper towel with the paints and the medium just took a little time. As the canvas sat there, the cells began to emerge. I'm still happy with the outcome and it fits right in with the rest of how one of the walls in my office is coming along!

and it goes with my "cement" focal wall: